  1  75 Taken by booklet.
  2  75 Taken by header.
  3  75 Only 10 header sheets allowed.
  4  75 Only 45 booklet pages allowed.
  5  75 Duplicate page number.
  6  75 Invalid insertion zone for page id.
  7  50  is missing or has no valid insertion zone.
  8  14 Booklet Name:
  9  80 SCANTRON FORMSHEADER SHEETSPGBOOKLET PAGESPGͻ
 10  80 F1  - HELP            F3  - HEADER SELECT         Esc - EXIT
 11  80 F2  - CLEAR ALL       F4  - BOOKLET SELECT        F10 - SAVE CHANGES
 12  14 SCANTRON FORMS
 13  13 HEADER SHEETS
 14  13 BOOKLET PAGES
 15  20 Are you sure?
 16  80 Can't save Configuration, program file is not accessible.
 17  22 Configuration Offset:
 18  44 Press the space bar to change the value for
 19   9 Baud Rate
 20   9 Stop Bits
 21   9 # of bits
 22   6 Parity
 23   9 Com Port
 24  12 reader type
 25  17 scan width   half
 26  17 scan width   full
 27  13 monitor type.
 28  75 Color card is not installed.
 29  48 Data Terminal Interface Configuration Attributes
 30  13 1 - Baud Rate
 31  13 2 - Data Bits
 32  13 3 - Stop Bits
 33  13 4 - Parity
 34  12 5 - Com Port
 35  12 6 - Model
 36  12 Scan Width
 37  12 7 - Monitor
 38  12 8 - Default
 39  60 Press a number for a function or Esc to exit.
 40  22  Print Simulated Form
 41  76 Turn on the printer.
 42  76 Press <F9> to start printing when you are ready.
 43   9 F1-Side 1
 44  12 F9-Print
 45  12 ESC-EXIT
 46  75 Printer is not on line.
 47  15 <Home>  <End>
 48  23   <PgUp>  <PgDn>  <Esc>
 49   4 PgUp
 50   4 PgDn
 51   9 -Print
 52   9 -Exit
 53  70 _Index______Zone Type______Begin Point___End Point___Width___Location_
 54  16  oktan  Semeli
 55  16  Related Item
 56  16  Darkness
 57  16  Scantron
 58  16  Printable ASCII
 59  16  Summation
 60  16  Bin Summation
 61  16  Ext Summation
 62  16  Random Summation
 63  16  Bin Rd Summation
 64  16  Ext Rd Summation
 65  16  Insertion
 66  16  Comment
 67  16  Identification
 68  16  Threshold
 69  16  Serial Number
 70  16  Bar Code
 71  43  Carriage Return
 72  43  Line Feed
 73  70  zones are defined.
 74  20 Output Record Format
 75  75 Warning.  Output record exceeds 4096 bytes.
 76  28 Booklet Output Record Format
 77   5 Pg ID
 78  25 Booklet Identification :
 79  20  is missing.
 80  75 Only header sheets defined.  See Form Record Output.
 81  25 No. of Booklet Pages   :
 82  75 Printer is not on line.  Try again !!  Press <RETURN> to continue -
 83  37 Side <1> Front Side <2> Back Side
 84  37 Starting Line
 85  37 Starting Column
 86  37 Ending Line
 87  37 Ending Column
 88  37 Zone Orientation [1/2]
 89  37 Skip Number of Line
 90  37 Skip Number of Column
 91  37 Zone Element Size [1..5]
 92  37 Zone Element Size [1..10]
 93  10 CHOICE SET
 94  48 INDEXLINECOLUMNITEMͻ
 95   7 -Select
 96  12 ZONE  WINDOW
 97  49 Threshold [1..99]
 98  47 Which Bar Code [1..10]
 99  47 Zone Element Size [1..245]
100  38 # of Chars for Length Check [0..245]
101  26 ASCII Char for Padding ['' ''..''~'']
102  13 Orientation 1
103  13 Orientation 2
104  16 ENTRY TABLE
105  16 SPACE
106  18 Don't Check
107  18 Check & Marked
108  18 Check & not Marked
109  49 Number of Digits [1..7]
110  20 -BUILT-IN CHOICE SET
111  20 COPY FIELDͻ
112  10 COPY FIELD
113  35  1 - Digit :
114  35  2 - Alphabet :
115  35      (A,B,C,D,E,F,G,H,I,J,K,L,M,
116  35       N,O,P,Q,R,S,T,U,V,W,X,Y,Z)
117  35  3 - Month :
118  35      (JAN,FEB,MAR,APR,MAY,JUN,
119  35       JUL,AUG,SEP,OCT,NOV,DEC)
120  35  4 - Day :
121  35      (MON,TUE,WED,THU,FRI,SAT,SUN)
122  35  Esc - Quit
123  20 -Discrimination[   ]
124  10 -Edit[ / ]
125  10 -Rjct[   ]
126   4 -Min
127   4 -Max
128   3 Del
129   7 -Delete
130   5 -Inst
131   5 -Delt
132   5 -Eras
133   5 -Save
134   6 -Copy
135  48 Reject both multiple marks and missing marks.
136  48 Reject on missing marks.
137  70 Press highlighted number to change option or <Esc> to exit.
138  54  EDIT OPTION TABLE ͻ
139  54 1 - Multiple     No    Yes
140  54 2 - Reject       No    Yes    Mult    Blnk
141  17 EDIT OPTION TABLE
142  12 Mult    Blnk
143  74 Use SPACE BAR to select zone.  Move to the new position and press <Enter>.
144  56 Enter the required information or press <Esc> to abort.
145  13 STEP & REPEAT
146  13 Index to :
147  27 No. of Zones to Repeat   :
148  27 No. of Times to Repeat   :
149  26 Starting Line of Block   :
150  26 Starting Column of Block :
151  16 ....Checking....
152  17 .....Copying.....
153  24 ...Out of Range Error...
154  70 Invalid Replication of zone #
155  52 Use SPACE BAR to select zones and <Enter> to repeat.
156  52 Use SPACE BAR to select zones and <Enter> to delete.
157  75 Only 250 zones allowed in STEP & REPEAT.
158  75 Only 250 zones allowed in DELETE A GROUP OF ZONES.
159  18 Deleting..........
160  48 Enter the Maximum Sum of Marks [1..4294967295] :
161  27 Length of Entered String :
162  48                                Inserted String
163  48                                Comment String
164  33  Multiple Mark Difference [0..98]
165  75 Sum of <thresh>+<diff> must be less than 99.
166  75 Invalid definition.
167  10 Column  :
168  10 TM Line :
169  22  On Which Timing Line
170  22  On which Column
171  14 MINIMUM SUM :
172  14 MAXIMUM SUM :
173  55 Invalid definition.  No. of choices must be 6 or 7.
174   8 F5-Side[
175  13 -Zone Element
176   8  Size[
177  28 Do you want to delete item #
178   8 COMPLETE
179  10 Item #
180  12 VALUEͻ
181  12 Position  :
182  30 Edit File :
183  50 F7-Discard  F8-Next  F9-Search  F10-Save  ESC-Exit
184   7 Record
185  33 Editing complete.   Save changes?
186  18 Saving Changes ...
187  15 All Finished.
188  56   Welcome to SCANTRON BOOKLET EDITOR !
189  56   <F1>  Display Help Screen.
190  56   <F2>  Clear all the header sheets and booklet pages and
191  56         start a new booklet definition.
192  56   <F3>  Select or de-select a header sheet from the form
193  56         library.  Use up and down arrow key to move bar
194  56         and press <F3> to process.
195  56   <F4>  Select or de-select a booklet page from the form
196  56         library.  See <F3> for processing a booklet page.
197  56   <Del> Delete pages previously defined in the booklet but
198  56         no longer exist in the form library.
199  56   <ESC> Exit booklet editor without saving the changes.
200  56   <F10> Exit booklet editor and save the changes.
201  56   Use  to change columns and   PgDn PgUp to view the
202  56   current column.  But make sure to move back to the FORM
203  56   LIBRARY column in order to activate the above options.
204  40  Press ESC to exit
205   4 None
206   4  Odd
207   4 Even
208  20  Press [Y/N]
209   5 Error
210  20   Press a key.
211  25  -Move selection bar
212  25  -Select     Esc-EXIT
213  15 Record number:
214  16 Record length =
215  70 A header sheet or first page is expected.
216  40 Out of sequence!  Booklet page
217  40 Download error in form description of.
218  21 Form description file
219  18  is an empty file.
220  61 Feed booklets or press <END of Batch> key on scanner to stop.
221  11 Form error.
222  20  records created in
223  21  records appended to
224  75 Scanner is not enabled.
225  15 < - Select
226  15 ESC  - Exit  
227  14 Load File Name
228  76 File not found.
229  76 No file in the directory.
230  76 Directory not found.
231  76 Wrong file extension.
232  76 File is empty.
233  25  Finished downloading 
234  30 Stop processing
235   9 Ascending
236  10 Descending
237  10 Scanned:
238  79 Press ESC or END OF BATCH key to stop feeding form -
239  12 END OF BATCH
240  16 Record Entered:
241   7 Model
242  75 No booklet has been downloaded yet.
243  30 Delete the unfinished booklet?
244  47 Not enough memory to process form descriptions.
245  29  is loaded and ready to read.
246  31 Enter the decimal value of the
247  56 How many seconds to be set to time-out option [0-999] -
248  45 Increment or Decrement serial number [I/D] -
249  54 Enter the starting serial number [7 digits maximum] -
250  29 Printer is currently enabled.
251  30 Printer is currently disabled.
252  34 Enable or Disable printer [E/D] -
253  18 Printed message -
254  75 No. timing lines error.
255  16 Incorrect scan.
256  21 Zone marking error.
257  39 Form Output Record exceeds 4096 bytes.
258  26  A function key is pressed.
259  75 No Form ID found.
260  18 ' will be appended.
261  75 Bar Code Error.
262  75 Bar Code Zone Error.
263  10 -FEED FORM
264   9 Length =
265  10 New Form
266  50 Enter the new description name, '.
267  11 New Booklet
268  50 Enter the new booklet name, '.
269  50 Wrong file extension.  Should be
270  70 Description exists.  Overwrite it ?
271  17 Invalid filename!
272  10 Viewing:
273  14 Configuration
274  14 Verification
275  76 Configure the data terminal interface.
276  76 Verify data communications interface.
277  14 Create Form
278  14 Edit Form
279  14 Erase Form
280  14 Copy Form
281  14 View Form
282  76 Create a new SCANTRON form description.
283  76 Edit an existing SCANTRON form description.
284  76 Erase an existing SCANTRON form description.
285  76 Copy an existing SCANTRON form description to a new file.
286  76 View an existing SCANTRON form description.
287  14 Create Booklet
288  14 Edit Booklet
289  14 Erase Booklet
290  76 Create a new SCANTRON booklet definition.
291  76 Edit an existing SCANTRON booklet definition.
292  76 Erase an existing SCANTRON booklet definition.
293  29 No SCANTRON forms defined in
294  14 Read Forms
295  14 Read a Booklet
296  14 Edit Output
297  76 Read forms and produce an output file.
298  76 Read booklets and produce an output record file.
299  76 View and edit output records of selected file.
300  14 on the Printer
301  14 on the Screen
302  14 Form Record
303  14 Booklet Record
304  76 Print a simulated form description.
305  76 Display a simulated form description on the screen.
306  76 Show the output record format for a form description.
307  76 Show the output record format for a booklet definition.
308  78   Maintenance   Form Editor Booklet Edit  Process     Display Form  Quit
309  70 The scanner is not enabled.  Press a key.
310  41 PROM version does not match the software.
311  51 Enter the value of the global threshold [1..99] -
312  33 Enter the zone number [1..999] -
313  35 Printer One or Printer Two [1/2] -
314  36 Enabled or Disabled printer [E/D] -
315  34 First line or Second Line [1/2] -
316  14 LCD message -
317  59 Enter the calibration factor for the line spacing [0..5]
318  39 #Timing line error or no Form ID found.
319  28 Zone marking error of zone #
320  65 Reply time out.
321  65 Unrecognized error.
322  65 Illegal command.
323  65 Sequence error.
324  65 Illegal zone number.
325  65 Number of forms over limit.
326  65 Number of zones over limit.
327  65 Out of memory.
328  65 Side undefined.
329  65 Choice fit error.
330  65 Element fit error.
331  65 0<Value>limit: number out of range.
332  65 Overflow: sum data > max sum.
333  65 Non-numeric where numeric expected.
334  65 Non-alpha where alpha expected.
335  65 Y/N expected and not found.
336  65 L/C expected and not found.
337  65 I/D expected and not found.
338  65 0,1 or X expected and not found.
339  65 Early EOF: command missing parameters.
340  65 EOF expected: command too long.
341  65 Delimiter expected but alphanumeric found.
342  65 ASCII data error.
343  65 Argument greater than limit.
344  65 L/U expected and not found.
345  65 There is no top head in this scanner.
346  65 There is no bottom head in this scanner.
347  45 This scanner has only
348   5  Zone 
349   6 Not ok
350  25 Error in downloading
351  17 Quit downloading
352  77 F1-Reset  F2-Download  F3-Read  F4-Options F10-Exit
353  67 F1-Reset  F2-Download  F3-Read  F4-Options F10-Save   Esc-Exit
354  11 Del-Discard
355  21   THRESHOLD COMMAND
356  21   DARKNESS COMMAND
357  21 SERIAL NUMBER COMMAND
358  21    PRINTER COMMAND
359  21  LCD DISPLAY COMMAND
360  21     READ COMMAND
361  21  CALIBRATION COMMAND
362  21     END CHARACTER
363  21    ERROR CHARACTER
364  21   NO MARK CHARACTER
365  21 MULTI-MARK CHARACTER
366  40  1 - END=   Set END character
367  40  2 - ERR=   Set ERROR character
368  40  3 - NMK=   Set NO MARK charcter
369  40  4 - MMK=   Set MULTIPLE MARK character
370  40  1 - QREV   Send model,revision,date
371  40  2 - THR=   Set global THRESHOLD value
372  40  3 - DARK   Retransmit darkness of a zone
373  40  6 - DSP$   Set LCD display message
374  40  8 - CAL=   Set calibration factor
375  40  5 - PRN$   Set printed message
376  40  4 - SNUM   Set automatic serial number
377  40  7 - TIME   Set READ Time-Out option
378  40  9 - SET    Set characters
379  14  Options Menu
380  81  Select the option number or <ESC> to quit.
381  20 Record Output File:
382  50 Enter the file name with proper drive or path,'
383  44 File exists.  Overwrite or Append the file ?
384  18 Invalid file name.
385  39 Data file will be lost.  Are you sure ?
386  15 Clear To Send
387  15 Data Set Ready
388  15 Carrier Detect
389  79 ͻ                             ɹ Rcv Ctrl Lines ̻
390  11 Address
391   9 Primary
392   4 alt2
393  19  1100 Communication
394  11 Word Length
395  21 RS-232 Communication
396  14  Version
397  33 SCANFORM BOOKLET UTILITY PROGRAM
398  75 Scanform requires at least 512k bytes memory.
399   3 Yes
400  75 No zone to copy.
401   6 -Side[
402  20 Invalid replication.
403  37  # of Timing Lines on Front of Form :
404  37  # of Columns                       :
405  37  # of Timing Lines on Rear of Form  :
406  37  Auto Reverse [Y/N]                 :
407  37  Scanthru Data Interpretation [Y/N] :
408  37  Stop on Error [Y/N]                :
409  37  Bar Codes to be Detected [0..10]   :
410  73 Enter start command required to verify the accuracy of the zone commands.
411  76 Move bar and press <Enter> to edit the start command parameter.
412  76 Define Page Identification Zone.
413  76 Define Multiple Choice Zone.
414  76 Define Related Item Zone.
415  76 Define Darkness Zone.
416  76 Define Scantron Zone.
417  76 Define Standard, Binary or Extended Summation Zone.
418  76 Define Standard, Binary or Extended Random Summation Zone.
419  76 Define data to be inserted in the output record.
420  76 Define Threshold and Difference Command.
421  76 Define Printable ASCII Zone.
422  76 Define Serial Number Zone.
423  76 Define Bar Code Zone.
424  76 Add a Comment line
425   8 Binary
426   8 Extended
427  76 Use Arrow, PgUp, PgDn, Home or End Keys to move selection bar.
428  40  has no zone defined yet.
429  16 Shuffle Zones
430  16 Step and Repeat
431  16 Delete Zones
432  76 Rearrange the order of defined zones.
433  76 Copy a group of zones.
434  76 Delete a group of zones.
435   8 Abandon
436  76 Save changes and exit.
437  76 Do not save changes and exit.
438  75 Identification Zone misplaced.
439  75 Invalid definition is defined in zone #
440  76        Start       Define Zone    Modify Zone      Tools          End
441  11 Form Name:
442  13  -Leave menu
443   4 Save
444  11 <F1>Side 1
445  26  channels on the top head.
446  29  channels on the bottom head.
447  23 . Exit to form editor?
448   3 ESC
449   3 Jan
450   3 Feb
451   3 Mar
452   3 Apr
453   3 May
454   3 Jun
455   3 Jul
456   3 Aug
457   3 Sep
458   3 Oct
459   3 Nov
460   3 Dec
461   3 Mon
462   3 Tue
463   3 Wed
464   3 Thu
465   3 Fri
466   3 Sat
467   3 Sun
468  48 Multiple marks are not allowed.
469  48 Multiple marks are allowed.
470  48 Reject neither multiple marks nor missing blanks.
471  48 Reject multiple marks only.
472  48 Reject missing marks only.
473  25  and ready to read
474  30 exceeds maximum sum
475  10 Form
476   8 B/W
477   8 Color
478  22  character [1..255] -
479  14  is expected
480  29 # of Front Timing Lines    :
481  29 # of Rear Timing Lines     :
482  79  Index       Zone Type      Begin Point   End Point   Width   Location
483  79  Pg ID       Zone Type      Begin Point   End Point   Width   Location
484  29 # of Columns               :
485  25 Form Identification :
486  48 Enter the Minimum Sum of Marks [1..4294967295] :
487  10 Press [
488   6 Both
489  76 Select the scanning order to scan a booklet or press <ESC> to quit.
490  76 A header sheet or the last page is expected. 
491   4 alt3
492   4 alt4
493  31 F2 - Test comports
